Z-LASER - Z80-X20-H-F-660-SLP60
| Manufacturer | Z-LASER |
|---|---|
| Part Number | Z80-X20-H-F-660-SLP60 |
| Inner Code | 4938064 |
| Technical specification | 722135016 Z-LASER Z80-x20-H-F-660-SLP60 SYSTEM SPECIFICATIONS: Wavelength (typ.) 660nm wavelength tolerance ±10nm Wavelength drift (typ.) 0.25nm/K Output power (typ.) 80mW Transverse Mode Single Transverse Mode RMS noise (20 Hz to 20 MHz, typical) < 0.5% peak-to-peak noise (20 Hz to 20 MHz, type.) < 1% Boresight Error (typ.) typ. 3mrad Pointing Stability <10μrad/ K ± 3% power stability over the entire temperature range Start time <2sec APC operating mode Laser class (EN 60825-1) 3R ELECTRICAL SPECIFICATIONS: Supply voltage 5-30VDC Operating current (max) <500mA Electrical insulation Potential-free housing M12 5-pin connector: A-pining connector Power consumption <2.5W I²C, RS-232 (5V) interfaces OPTICAL SPECIFICATIONS: projection line, homogeneous intensity distribution Standard line optical configuration (slp) Opening angle 60° Line straightness < 0.05% Line orientation parallel to the groove in the clamping area Focusing range can be focused from 100mm to 10,000mm Maximum frequency up to 400kHz Rise time <100ns Fall time <100ns signal level < +0,9V (VIL_max) & > +2.2 V (vIH_min) Operating range (VDC) 0-30VDC Maximum bandwidth <10Hz Linearity < 5% (from 10% to 100% of laser power) 0-2VDC active range Impedance 100 kΩ to internal VCC (3.3 V) Max. voltage range 0-30VDC AMBIENT CONDITIONS: Operating temperature -10°C to +50°C/14°F to +122°F Storage temperature -40°C to +85°C/-40°F to +185°F Relative humidity (max) < 90%, non-condensing Heat loss (max.) <1W Shock and vibration in accordance with IEC EN 61373:2011, Cat. 2 MECHANICAL SPECIFICATIONS: Net weight 125g/0.28 lbs Case dimensions (ø x L) 20h7 x 117mm/0.79 x 4.61 in Material stainless steel Protection class IP67 24-month warranty |
Please contact us to request a price quote for Z-LASER - Z80-X20-H-F-660-SLP60, or for any other model as well. We offer competitive prices, fast delivery and a wide products distribution network in the UK.
WE SELL ONLY NEW AND ORIGINAL PRODUCTS!
Our company is not an authorized distributor. All rights are reserved by the manufacturers and their official partners.