Tapflo - Membranes for TХ 120 ABT

More products of Tapflo

• CTHAA-03

  Tapflo® Hygienic Centrifugal Pump Type CTHAA-03 Max. Flow 7 m³ / h Max. Discharge pressure 2.7 mWS Max. System pressure 9.5 bar Suction lift not self Max. Temperature 90 ° C Product wetted housing parts 316L stainless steel electro-polished Ra <0.8 microns Impeller stainless steel 316L electro-polished Ra <0.8 microns Lantern AISI 316L Mechanical seal single acting: Ceramic / graphite / EPDM (FDA) Housing O-Ring EPDM (FDA) Suction dairy fitting DIN 11851 DN 25 Pressure connection dairy fitting DIN 11851 DN 25 Drive: 230/400 V, 50 Hz, 0.37 kW, IP 55 Speed ​​2900 r / min at 50 Hz

  Make request
• JJJ

  Make request
• T125 STS-3X40

  Pneumatic diaphragm pump housing: AISI 316L polished Membrane: PTFE valve balls AISI316 Connection: dairy pipe DIN 11851 DN40 01 1.00 pcs T125STS- 3x40 Capacity: Max. 125 l / min Pressure: max. 7 bar Product contact housing parts: 1.4404 (SS 316 L), polished Membranes: PTFE / EPDM, FDA approved Valve balls: AISI316L Suction and pressure connection: dairy pipe DIN 11851 DN40 Max. Operating temperature: 100 ° C, rapid CIP / SIP 125 ° C Max. Solid Size: 6 mm

  Make request
• TM 125 STS-3X TM 125 STS-3X

  pump

  Make request
• TX120ANN

  Druckluftmembranpumpe

  Make request
• TRD20PTT

  air diaphragm pump

  Make request
• T100PEE

  Air Diaphragm

  Make request
• 6-100-15

  Membrane EPDM

  Make request
• 6-100-16

  Kolbenstange M 1.4571

  Make request
• 6-100-18

  O-Ring mit Dichtung EPDM

  Make request
• 6-100-222-22

  Universal PE valve seat insert

  Make request
• 6-100-23

  Valve ball EPDM

  Make request
• 6-100-25

  silencer

  Make request
• 6-050-27

  Sicherungsring Stahl

  Make request
• 6-050-30

  O-Ring Steuerventil NBR

  Make request
• 6-100-36

  Mittelblockdichtung PE

  Make request
• 6-100-43

  O-Ring Ventilsitz EPDM

  Make request
• 6-100-47

  O-Ring Mittelblockdichtung NBR

  Make request
• 6-050-61

  Control valve complete brass/NBR

  Make request
• Е164401

  for MN010-2 AISI

  Make request
• Е146901

  for MN013-2 AISI

  Make request
• female drive shaft for MN010-2 AISI

  Make request
• rotor for MN010-2 AISI

  Make request
• joint shaft for MN010-2 AISI

  Make request
• mechanical seal for MN010-2 AISI

  Make request
• rubber sleeve for MN010-2 AISI

  Make request
• pin for MN010-2 AISI

  Make request
• seal cover for MN010-2 AISI

  Make request
• screw pos 81 for MN010-2 AISI

  Make request
• screw pos 81.6 for MN010-2 AISI

  Make request