Nuova Fima - 1.10.3.A.C---.XXXX.21M.S63

More products of Nuova Fima

• 203-160-D-DIVERS

  Pressure gauge Type: 01.20.3.A.G.ABFD.41M.L02 Execution: All st.st. bourdon tube pressure gauge, SOLID FRONT, Glycerine filled Mounting: direct Diameter: DN 150 Connection: 1/2" BSP male in st.st. AISI 316 L Range: 0-15 psi Case material: bayonet-lock case in st.st. AISI 304 Window material: safety glass Accuracy: Kl. 1.0 with adjustable pointer

  Make request
• 3.30 - STANDARD MODEL

  pressure switch

  Make request
• 52240251060000

  00020 201071825 GAUGE:PRESS;0-10KG/CM2,1/8IN,NPT,2-1/2IN GAUGE: PRESSURE RANGE: 0-10 KILOGRAM PER SQUARE CENTIMETER CONNECTION SIZE: 1/8 IN CONNECTION: NATIONAL PIPE THREAD FACE SIZE: 2-1/2 IN CONNECTION LOCATION: LOWER MANUFACTURER: NUOVA FIMA MODEL NUMBER: 52240251060000 *PHOTOS ATTACHED* 00030 201090588 TRANSDUCER:ELECTRO PNEUMATIC,4 TO 20MA,%

  Make request
• 850N157

  Make request
• 940541-2690 (0-160C)

  TEMPERATURE GAUGE, RANGE 0-160C, APPLICABLE SERIAL NO 2758/02

  Make request
• 940680-2700(0-200C)

  TEMPERATURE GAUGE, RANGE 0-200C, APPLICABLE SERIAL NO 2758/06

  Make request
• A.O 7852 NOT AVAILABLE

  thermostat

  Make request
• CC1

  (Test and conformity of 3.1 NUOVA FIM)

  Make request
• DDM-DM-D-DIVERS 02.16.1.A.G.0/600 mbar.43M.C.S31.R10

  Statistische Warennummer: 90262040 Differential pressure gauge Type: 02.16.1.A.G.0/600 mbar.43M.C.S31.R10 Execution: with double diaphragm Mounting:direct or with back flange diameter: DN 150 Lower Connections: 1/2" NPT male in st.st. AISI 316L Range: 0- 600 mbar static pressure: max. 100 bar Case material: bayonet-lock case in st.st. AISI 304 window material: glass case filling: glycerine 2" Stackes bracket accuracy: Kl. 2,5 %

  Make request
• DMU-S-D-001002

  Commodity Code: 90268020 Type Pressure transmitters: 08.S18 NUOVA FIMA Code: 08.S18-0 / 40 bar-23M-1 Measurement range: 4-20 mA 2 wire Power: 0-40 bar output 8-30 VDC accuracy: 0 , 5% FSO IEC 60770 Process connection .: 1/4 NPT male thread Electrical connection:. connector DIN 43650 IP 65

  Make request
• DMU-S-D-001009 08.S18 08 / S18 AAFE = 0-16 BAR 23M 1 = OUTPUT: 4...20 MA- 2 WIRES , SUPPLY: 8...30

  Pressure sensor Execution: pressure sensor with ceramic cell

  Make request
• DMU-S-D-DIVERS

  Pressure sensor Type: 08.S18 Execution: pressure sensor with ceramic cell Accuracy: 0,5% F.S.V acc. to IEC 60770-Limit point Electrical connection: Male and female plug DIN 43650 Specification Code acc. to Data-sheet 08 = Electronics S18 = Pressure transmitter 0-600 bar = range 43M = process connection: 1/2 NPT male 10E = output: 4-20 mA, 2 wire / supply: 10..30 VDC Please check the process connection and output. It was not specified in the inquiry.

  Make request
• DMU-S-D-DIVERS

  Pressure sensor Type: 08.S18 Execution: pressure sensor with ceramic cell Accuracy: 0,25 % F.S.V acc. to IEC 60770-Limit point Electrical connection: Male and female plug DIN 43650 Specification Code acc. to Data-sheet 08 = Electronics S18 = Pressure transmitter AAFE = 0-16 bar 23M = process connection: 1/4 NPT male 1 = output: 4...20 mA- 2 wires , supply: 8...30 V FPM = Viton gasket K02 = accuracy 0,25%

  Make request
• DRUMI-D-000266

  Statistische Warennummer: 90262040 Pressure transmitter with local readout for homogenizer Type: 08.MOM.3.A.E.AAFZ (0...400 bar).422.1. Filling liquid: dielectric oil Mounting: direct, bottom connection Dial diameter: 100 mm Process connection: SA422 Range: 0-400 bar case in st.st. AISI 304 glass window Output: 4-20 mA Power Supply: 10...30Vcc with logo "NUOVA FIMA" and "LR"

  Make request
• DRUMI-D-DIVERS

  Pressure gauge Type: 1.20.3.A.E.41M. Execution: all st.st. bourdon tube pressure gauge Solid front execution, glycerine filled Mounting:direct dial diameter: DN 100 Range: 0-16 bar Case material: bayonet-lock case in st.st. AISI 304 window material: safety glass accuracy: Kl. 1,0 with diaphragm seal MGS 9/2B 4.2B0.9.9.43F.41F.BAI diaphragm in Hastelloy C276 process connecion in Hastelloy C276 process connection: 1/2" NPT female

  Make request
• DRUMI-D-DIVERS

  (Pressure gauge Type: 01.18.1.A.G.43M.T01 Execution: all st.st. bourdon tube pressure gauge Mounting: direct Diameter: DN 150 (6") Connection: 1/2" NPT male, bottom Range: 0/100 bar Case material: bayonet-lock case in st.st. AISI 304 Window material: glass Accuracy: Kl. 1.0 Specials: tropicalization + Diaphragm Seal MGS 9/111 04.111.4.4.41F.43M gauge connection: 1/2" BSP female process connection: 1/2" NPT male)

  Make request
• DRUMI-D-DIVERS 08.MOM.1.A.E

  (Pressure transmitter with local readout for homogenizer Mounting: direct, bottom connection Dial diameter: 100 mm Process connection: SA167 Range: 0-600 bar case in st.st. AISI 304 glass window Output: 4-20 mA Power Supply: 10...30Vcc with calibration certificate (C01))

  Make request
• E04400.0001

  CAMERA

  Make request
• FM-KL01-D-000008 01.27.1.A.I

  Statistische Warennummer: 90262040 Pressure gauge Type: 01.27.1.A.I Execution: Laboratory bourdon tube test gauge Mounting: direct Diameter: DN 250 (10") Connection: 1/2 NPT male bottom in st.st. AISI 316 Range: 0-40 bar Case material: Aluminium, black coated External zero-adjustment High precision movement mounted on ball bearing Dial: Anti-parallax mirror Pointer: balanced, antiparallax knife-edge micrometer, adjustable Window material: Plexiglas Accuracy: Kl. 0,1 Specials: factory test certificat, traceable to international Standard

  Make request
• FM-KL01-D-DIVERS

  range 0-250 bar

  Make request
• GAUGE MODEL MGS 18

  (version "all stainless steel": DN 63) 1.18.3.DC0/16 BAR.21M

  Make request
• GAUGE MODEL MGS 18 (VERSION "ALL STAINLESS STEEL": DN 63) 1.18.3.DC0/25 BAR.21M

  Make request
• KM-D-DIVERS

  (Pressure gauge Type: 01.M2.3-D-E-0/400 bar-41M-04D.BM2.E Execution: all st.st. bourdon tube pressure gauge MCE18/3/E oil filled with double electric contact Mounting: with front flange diameter: DN 100 Connection: 1/2" BSP back in st.st. AISI 316L Range: 0-400 bar Case material: bayonet-lock case in st.st. AISI 304 window material: Plexiglas contacts: First contact opening, second contact opening on rising pressure, magnetic snap action)

  Make request
• MANO-ZUB-D-DIVERS

  Over pressure protection MP 4/8A in st.st. AISI 316 5.48A.5.41M.41F setting: 3....15 psi process connection : 1/2" BSP male gauge connection: 1/2" BSP female

  Make request
• MGS18 1.18.2.A.E-.AAFB.43M.C40.T32

  pressure gauge

  Make request
• MGS18 DN100-150

  1.18.3.A.E.---.DAE7.41M.KCS ALL ST. ST. PRESSURE GAUGE, MODEL MGS18. 4" (100 MM) CASE DIAMETER. BOTTOM CONNECTION., RANGE 0...6 BAR/PSI, 1/2" BSP MALE PROCESS CONNECTION, ALUMINIUM DIAL, WHITE BACKGROUND WITH BLACK MARKINGS AND FIGURES, ST. ST. CASE AND BAYONET RING, DIRECT MOUNTING, ST. ST. PRECISION MOVEMENT, BLACK ALUMINIUM POINTER, ACCURACY ±1,0%, GLYCERINE FILLING, IP67 PROTECTION DEGREE, TEMPERED GLASS WINDOW, ST.ST. RESTRICTOR, MOUNTING WITH DIAPHRAGM SEAL

  Make request
• MP5-22

  A 106 GR B carbon steel process connection 1/2" BSP male gauge connection: 1/2" BSP female

  Make request
• RHH1 VD U180

  o. 3/20800420/10 Flow: 23,000 Nm3 H: 760 mbar

  Make request
• TB+143 350 700 M.65

  Thermometer, ½” Q: 100 0-150

  Make request
• TB899 (6.TB8.9.9.F.ATFT.43M.7)

  BIMETALLIC THERMOMETER

  Make request