Marathon (Regal) - HJN100L4E2U24B 2001

More products of Marathon (Regal)

• DM043.0HJNB3

  motor

  Make request
• DM0430.0EMKIE2B3-K2

  EMK three-phase standard motor IE2 - cast iron housing Type: KQM1G200L1-4B3E2K Power: 30.0 kW Speed: 1500 1 / min. Mounting: B3 Protection: IP 55 Voltage: 400/690 V D / Y Frequency: 50 Hz Thermal class: F (B) Shaft: 55 x 110 mm Other: KK top AS / BS grease nipple Weight: 243.0 kg Additional equipment: 1 x 3 PTC thermistors for tripping 155 ° C

  Make request
• DM060.75EMKIE2B3

  EMK three-phase standard motor IE2 - Aluminum housing Type: KAE2A90S-6B3E2K Power: 0.75 kW Speed: 1000 1 / min. Mounting: B3 Protection: IP 55 Voltage: 230/400 V D / Y Frequency: 50 Hz Thermal class: F (B) Shaft: 24 x 50 mm Other: KK top Weight: 14.5 kg Terminal box position due to detachable feet modifiable. Efficiency class IE2 Additional equipment: 1 x 3 PTC thermistors for tripping 155 ° C

  Make request
• DM1 132M4/2 6,8/0,8KW

  DOUBLE SPEED MOTOR

  Make request
• DM1 132S8 - B5

  MOTOR

  Make request
• DM1 160 L2

  Make request
• DM1 160L2 – B?

  18,5Kw 2935Rpm 400V 50Hz IP55 Mounted with: - PTC

  Make request
• DM1 180L4

  22kw 3000 rpm 400/690v 50hz B?

  Make request
• DM1 180M2 B3

  22kw 3000 rpm 400/690v 50hz iP55

  Make request
• DM1 180M2 B35

  22kw 3000 rpm 400/690v 50hz iP55

  Make request
• DM1 180M4

  18,5kw 1470 rpm 400/690v 50hz IP55 PTC 150 V1

  Make request
• DM1 250M2 obsolete/ replaced by TCA250MA2E3U46 1001

  Motor

  Make request
• DM1 250M4 obsolete, replaced by TCA250MA4E3U46B 3011+Rf

  Make request
• DM1 2611054001

  Make request
• DM1-IE3 280S4 – B3

  Make request
• DM1 280S4 – B3

  Mounted with PTC and heating 220V

  Make request
• DM1 355LY4 – V1 obsolete, replaced by HJN355LY4E2U46B 3011

  355KW 1500Rpm 400/690V 50Hz IP55

  Make request
• DM1 HE 160 M4 3 MOT RTG S1 7,5 KW 1470D/D WT NDE 6309ZZC3 PTC 150°CCPN- 0010381203COS F 0,84-120 KG

  special oil (220C rezistant),B5 Flanged, footless,Thermistor, The motor terminal box most be moisture drain hole in the rear,front and rear bearings in the engine must be grasör,motor must be complete cast iron housing

  Make request
• DM132S6IMB3

  Air Compressor Cooler Motor,3kW, 7.0A, 415V, 50Hz, 3 Phase, IP 54, 960 r/m F=132S, IMB3, Insulation F, EX NA II T3, Rating 91 NDE/DE: 6308/2Z With space heater 240V and additional 1 no. of cable entry (supply cable and power supply) 20mm

  Make request
• DM1-G 160S2

  3 AC-Motor-Nr.3087336003 year 2009

  Make request
• DM1-HV 450 M 4

  High Voltage Motor Make: marathon Power: 500.0 kW 6.0 kV Speed: 1485 rpm Type: B 3 Frequency: 50 Hz Protection: IP 55 Insulation Class F to B D-bearing side: 6328C3 (direct coupling) Bearing N-end: 6328C3 Cooling: IC411 Other: PTC 150 ° C - TEFC - Starting DOL - 3x PT100 for temerature control of the windings (2 per phase) - 2 x PT100 for temperature control of the bearings - AC Heater 1 ~ 230-240V, 50Hz

  Make request
• DM1-IE2 250M2 –B3

  55KW 3000Rpm 400/690V 50Hz IP55 66KW 3550Rpm 440V 60Hz

  Make request
• DM1-IP23 355M2 – B3

  500KW 2970Rpm 400/690V 50Hz IP23

  Make request
• DMA 112MX2 – B

  5,5KW 2870Rpm 400V 50Hz IP55 Mounted with: - PTC

  Make request
• DMA 63K4

  Type: DMA2 63 K4 Power: 0.12 kW Speed: 1500 1 / min. Mounting: B14klein Protection: IP 55 Voltage: 230/400 V Frequency: 50 Hz Thermal class: F Shaft: 11 x 23 mm Other: KK top Weight: 3.5 kg Flange: 90-75 - 60mm

  Make request
• DMA 80K4

  motor

  Make request
• DMA 80K4 – B

  Make request
• DMA 90L4 – B?

  foot or flange mounted, if flange need outside diameter of flange

  Make request
• DMA2 112M2

  Make request
• DMA2 80 G 4

  Motor

  Make request