Erichsen
We offer high quality Erichsen products for competitive prices. Check our web range of Erichsen and send us an enquiry, even if you cannot find the product you are looking for there. We deliver your goods right to your doorstep.
Our company is not an authorized distributor. All rights are reserved by the manufacturers and their official partners.
Products of Erichsen
-
MODELL 312 Bestellnummer: 0002.01.31
KONISCHER DORNBIEGEPRUFER
-
00020131
Conical Mandrel Bending Tester, EN, ISO, ASTM
-
0004.01.31
Sheet Metal Testing Machine, Model 100 with manual operation, maximum drawing force 30 kN and compliance with the standard adjustable constant blank holding pressure max. 10 kN, with Tiefungsanzeige by counting with 0.1 mm Reading accuracy as well as a Test Tool No. 27 after EN ISO 20482, for testing the deep drawability of sheet metal and bands from 0.1 to 1.5 mm thick (² at approximately 400 N / mm strength) in widths of 13-90 mm, by means of the Erichsen cupping test according to EN ISO, EURO NORM, BS, NF, GOST, UNI, UNE. Weight: approximately 36 kg net Dimensions: approx 340 x 350 x 450 mm (L x W x H)
-
00040131 MODEL 100
sheet metal testing machine
-
0009.01.31
(Dry film thickness meter Rossmann 233 ISO, ASTM, BS, FTMS "REFERENCE CLASS" Measuring range: 0 - .mu.m 1000)
-
0019.01.31
[multi cutting device 295 / I with 6 blades and cutting distance 1 mm for cross-cut tests in accordance with EN ISO, ISO, VDA and EN, incl Motion, Polyamide bristle brush and plastic case]
-
0019.01.31
More Cutter 295 / I 6 with cutting, cutting distance for 1 mm Cross Hatch tests in accordance with EN ISO, ISO, VDA, EN, incl. magnifying glass Nylon bristle brush and plastic case
-
0019.01.31
More cutting device 295 / I "REFERENCE CLASS" with 6 blades and cutting distance 1 mm for cross-cut tests in accordance with EN ISO, ISO, VDA and EN, incl Motion, Polyamide bristle brush and plastic case
-
0019.01.31 (MEHRSCHNEIDENGERAT 295/I)
(Having 6 blades, cutting distance for 1 mm Cross Hatch tests in accordance with EN ISO, ISO, VDA, EN, incl. magnifying glass Nylon bristle brush and plastic case)
-
Mehrschneidengerat 295/I (00190131)
Mehrschneidengerät
-
0019.014.31
Cutting device 295 / XIV, hard-coated probe mounted in adapter block with holder, for cuts on curved Surfaces, incl. Flexible ruler and Plastic case, with no type M
-
0019.02.31 (MEHRSCHNEIDENGERAT 295/II)
(Having 6 blades, cutting distance of 2 mm cross hatch tests in accordance with EN ISO, ISO, ASTM, JIS and VDA, incl. magnifying glass, polyamide bristle brush and plastic case)
-
0019.02.31 (MEHRSCHNEIDENGERAT 295/II)
(Having 6 blades, cutting distance of 2 mm cross hatch tests in accordance with EN ISO, ISO, ASTM, JIS and VDA, incl. magnifying glass Nylon bristle brush and plastic case)
-
0019.02.31 Multi Cutter 295 / II
(with 6 blades, cutting distance 2 mm for cross-cut tests according to EN ISO, ISO, ASTM, JIS and VDA, incl. magnifying glass Nylon bristle brush and plastic case)
-
0019.07.31 (295/VII)
Multi-edge trimmer
-
0020.01.31
Hardness Test Model 318 incl. Probe # 1. (After Bosch, 0.75 mm Ø) and 3 springs
-
0049.17.33
Probe cards PK used to determine the opacity of pigmented Paints of all kinds: Type 22/4 - Spread size: 500 cm ²
-
00580131
Indentation hardness tester according to Buchholz DIN 53153 "REFERENCE CLASS" incl. special measuring microscope with lighting
-
0062.02.31 (Model 321-4 mm)
Flow Cup
-
0062.04.31
Dip Flow Cup (Orifice dia. 8 mm), Model 321
-
0069.01.33 (150 MM BREIT, 10 µM)
(Single spirals to the model 358)
-
00710331 / Modell 234 R/III
Manual coating thickness gauge
-
0071.03.31 Wet Film Thickness Gauge Model 234 R/III
DIN, ISO, ASTM, BS, NF "REFERENCE CLASS" Measuring range: Scale division: 0-125 µm; 5 µm
-
0094.01.31
Ritzstift nach van Laar 426
-
0098.01.31
(Coating thickness gauge Paint Inspection Gauge P.I.G.455 compl. with normal cutting no. 6 for thicknesses to 200 microns and in marker Lederetui)
-
0100.01.31
Sikkens scratching tool 463
-
01000131
Scratch Stylus acc. to Sikkens
-
0165.04.31
Diving flow cup in accordance with nozzle diameter 6 mm